Outer Pipe Configurations - MTS Systems Level Plus Operation And Installation Manual

Model MR Operation and Installation Manual
Product Overview, Components

OUTER PIPE CONFIGURATIONS

The outer pipe is constructed of a variety of configurations, shown below. Contact factory for other materials (such as Hastelloy C or Teflon).
3/4 in. NPT
95 mm (3.75 in.)
Adjustable fitting
Tank flange
(provided by customer)
Order length
Pipe diameter
16 mm (0.625 in.)
74 mm (2.9 in.) min.
Inactive zone
Tip of transmitter
Figure 1. 5/8 in. diameter rigid outer pipe of 316L stainless steel
1 in. NPT Adjustable
compression fitting, male
305 mm (12 in.)
Tank
flange
Order length
Outer flex pipe 7/8" dia.
(316L stainless steel)
Bottom-fixing Hook
Figure 3. 7/8 in. diameter flexible pipe of 316L stainless steel
Level Plus ® Liquid-Level Transmitters - M-Series Model MR Analog Transmitter
Operation and Installation Manual, Part No.: 550720 Revision K (EN) 02/2016
minimum
686 mm (27.0 in.)
76.2 mm
127 mm
(3.0 in.)
(5.0 in.)
50.8 mm
(2.0 in.) Typ.
Bottom-fixing Bottom-fixing Weight
Magnet
49 mm
(1.9 in.) Typical
Sanitary process connnection
(sanitary cap)
Pipe diameter 16 mm (0.625 in. dia.)
constructed of 316L stainless steel
Order length
Figure 2. 5/8 in. diameter rigid outer pipe of polished 316L
stainless steel with sanitary process connection and end plug
4
MTS Sensors