Mutec MC-3+ Smart Clock USB Operating Manual page 27

Appendix
1 2
Jumper Position 1
= no Termination
Inside View – Clock Input Termination
Word Clock & S/P-DIF
1-10M Input Input
Termination MC-3+USB-
3-pin socket JP1 Mainboard-
If you want to switch-off the termination, remove carefully the jumper from the two pins of
position 2 of the socket and plug it onto the two pins of position 1 (see adjacent sletch).
Attention
The jumper must be plugged on position one of the socket – do not omit him!
OP
PCB
27