Installation; Content Of The Box; Placing The Device - Mutec MC-3+ Smart Clock USB Operating Manual

Installation

Product Registration for Warranty and Support
We ask you to be so kind to register your MUTEC product through our website immediately after buying. This ensures full
warranty services over a period of two years after purchasing the product. More-over, for all registered products we offer to our
customers technical support. We also will inform you about product updates and new products which may of interest for you
(on voluntary base, of course).
Please regsiter your product at:
www.mutec-net.com > Service > Product Registration
Or for direct access type in the following URL into your browser:
http://www.mutec-net.com/produktregistrierung.php?lng=en
Social Media
face b ook. c om/ m ut ecp ro
h tt ps :/ / p lu s. g oog le. com / 11 6 7 0 5 3 7 88 0 0 1 5 5 5 48 6 9 6

Content of the Box

Your MC-3+ Smart Clock USB was packed carefully. Nevertheless we recommend to check the content directly after opening
the package:
1 x MC-3+ Smart Clock USB
1 x USB cable
1 x RCA-BNC adapter
1 x Power cable
1 x Manual
If there are any damages visible, please refer to Safety Instructions and Warranty Regulations for further details.

Placing the Device

The unit should be set up as closely as possible to the devices to which it will be connected with to avoid excessive cable
lengths. The four custom-designed case feets include a rubber ring to protect the ground's surface from being damaged.
The device can be mounted into a standard 19" rack and will require 1U. Therefore, we offer an optional rack mounting kit,
called MW-05/19. This includes two rack angles which need to be screwed at each side of the device's case. Before mounting
the device into a 19" rack, please unscrew the four rubber feet with a suitable screwdriver. Install the device so that 1U of rack
space is left free both above and below the device to allow for sufficient ventilation! Additional slide-in rails on the rack inside
are recommended for safe installation. This will also avoid long-term mechanical deformation of the housing.
Attention
Before installing the unit the section Safety Instructions located at the beginning of this manual should be read carefully!
Never expose the device and accessories to rain, moisture, direct sunlight, or excessive heat produced by radiators, heaters, or
spot lights! Sufficient air circulation in the environment of the device must be ensured!
10
p inte r es t.com /m utecpro