Related Manuals for Mutec MC-1.2
Summary of Contents for Mutec MC-1.2
- Page 1 Operating Manual M U T EC Gmb H · F o n 0049- (0 )30- 74 68 8 0-0 · cont act @m utec-net. com · www. mutec-net. com...
-
Page 3: Table Of Contents
Control Elements and Terminals MC-1.2 Front Panel ..................................10 MC-1.2 Rear Panel ..................................10 USB Driver Installation & Windows Settings MUTEC USB Audio Class 2.0 Driver for Windows ........................12 Driver Download and Installation Procedure ..........................13 Windows Settings ..................................14 Operation General System Operation ................................ -
Page 4: Safety Instructions
We herewith confirm that the product complies with the mediately! If the unit is damaged, please do NOT return it to MUTEC GmbH, but notify your European Commission’s standards on electromagnetic dealer and the shipping company immediately, otherwise claims for damage or replacement compatibility. -
Page 5: Warranty Regulations
§1 Warranty MUTEC GmbH warrants the flawless performance of this product to the original buyer for a period of two (2) years from the date of purchase. If any failure occurs within the specified warranty period that is caused by defects in material and/or workmanship, MUTEC GmbH shall either repair or replace the product free of charge within 90 days. -
Page 6: Introduction
USB audio streams with embedded clock rates up to 192.0kHz. Various operation modes enable the use of the unique MC-1.2 in many applications. Signals received at the USB port are con- verted to five digital audio outputs simultaneously, which allows the connection of multiple receivers at your computer. When selecting one of the digital audio inputs, the signal received is converted to an USB audio stream and sent into your computer. -
Page 7: Peripheral Mutec Products
MS Windows Driver Support When connecting your MC-1.2 to a Windows computer, you have to use our special USB Audio Class 2.0 Driver for Windows available on our website. Install the driver first before connecting the MC-1.2 to your computer! Please go to: www.mutec-net.com >... -
Page 8: Installation
Installation Content of the Box Your MC-1.2 was packed carefully. Nevertheless we recommend to check the content directly after opening the package: 1 x MC-1.2 1 x Power cable 1 x USB cable 1 x Manual If there are any damages visible, please refer to Safety Instructions and Warranty Regulations for further details. -
Page 9: General Recommendations For Interface Wirings
Information MUTEC offers optical cables of various lengths that have been specifically tested for the transmission of ADAT™ and S/P-DIF signals. Ask your local dealer for such cables! -
Page 10: Control Elements And Terminals
Control Elements and Terminals MC-1.2 Front Panel 1 »POWER« This red LED lights up when the unit is switched on with the rear panel power switch. 2 »MENU« Use this key to access the different menus. 3 »SELECT« Use this key to select a function within a specific menu. - Page 11 This USB (Universal Serial Bus) interface receives or sends data streams in compliance with USB2.0 (USB-B connector). When connecting the MC-1.2 to a MS Windows PC, please install the provided USB2.0 Audio Class Driver for Windows at first on your computer.
-
Page 12: Usb Driver Installation & Windows Settings
General Description When connecting your MC-1.2 to a Windows computer, you have to install the USB Audio Class 2.0 Driver for Windows availa- ble on our website. This must be carried out regardless of the sampling rates of the transfered audio streams. -
Page 13: Driver Download And Installation Procedure
USB Driver Installation & Windows Settings Driver Download and Installation Procedure Please go to our website to download the MUTEC USB Audio Class 2.0 Driver for Windows as follows: www.mutec-net.com > Products > USB Interfaces > MC-1.2 > Downloads Or for direct access type in the following URL into your browser: http://www.mutec-net.com/product_mc-12.php?lng=en#download... -
Page 14: Windows Settings
After installation of the MUTEC USB Audio Class 2.0 Driver for Windows is successfully completed, you can connect your MC- 1.2 to one of your computer’s USB ports by using the USB cable included in the scope of delivery. Switch on your MC-1.2 and it should be automatically recognoized by your computer‘s operating system. -
Page 15: Operation
Attention In the special case of the MC-1.2, its operation with help of the »MENU« and »SELECT« keys on the front panel is limited to the selection of the digital audio input only. Thus, the keys have got the same function. It makes no difference for selecting the digital audio input which one of both keys is used.menu, the LED row marked with »A«... -
Page 16: Operation Of The Mc-1.2
No further adjustments are necessary for that general operation of your MC-1.2. That even works if the device is not connected to the mains supply, called: USB bus-powered operation. -
Page 17: Generic Functions
To reactivate the keys and the LEDs, please press both keys for apperox. four seconds until all LEDs light again. Factory Reset You can reset the operating system of your MC-1.2 to the initial status by switching on the unit while pressing the »MENU« key simultaneously. -
Page 18: Appendix
Appendix Pin Assignment of the Connectors Mains BNC Input/Output for Optical TOSLINK Input/Output AES3id, S/P-DIF for S/P-DIF 1 Optical signal 1 Live, phase (brown; USA: black) 1 Signal 2 Protective earth (green/yellow; USA: green) 2 Ground 3 Neutral (blue; USA: white) AES/EBU, XLR, Input AES/EBU, XLR, Output RCA, Input/Output... - Page 19 Front Panel Size / Material 198 x 44 x 4 mm (W x H x D), aluminum, aluminum- or black-colored Weight ~ 1170 g MC-1.2 Order Information Front aluminum-colored Item no. 8015-053, EAN code: 4260342460993 Front black-colored Item no. 8015-054, EAN code: 4260342461013...
- Page 20 M U T EC GmbH · F on 0049- ( 0)30 -74 6 8 80- 0 · conta ct@ m ut ec-net. com · www. mut ec-net. com...