Variant 1, The Video Recorder Is To Control The Camera Recorder; Variant 2, The Camera Recorder Is To Control The Video Recorder; Setting The 'Preroll Time - Philips VR9010 Operating Instructions Manual

Variant 1, the video recorder is to control
the camera recorder
a
Start copying with the
recorder.
The camera recorder starts 'PLAYBACK' and at the same
time the video recorder starts 'RECORDING'.
b
Stop copying with the
recorder.
c
End copying with the
MENU
Variant 2, the camera recorder is to control
the video recorder
a
Start copying with the corresponding button on the
camera recorder.
The camera recorder starts 'PLAYBACK' and at the same
time the video recorder starts 'RECORDING'.
b
Stop copying with the PAUSE or STILL button on the
camera recorder.
c
End copying with the
MENU
RECORD/OTR n button on the video
STOP h button on the video
button.
button.

Setting the 'preroll time'

When the beginning of the recording is missing, the 'preroll
time' was too long. Select a shorter 'preroll time'.
If recording started too early, the 'preroll time' was too short.
Select a longer 'preroll time'. You can select a 'preroll time'
between 1:00 and 5:00 seconds.
a
Press the button.
MENU
Select the line 'RECORDING FUNCTIONS' with the
b
or button and confirm with the
P = ;P
Select the line 'RECORD SETTINGS' with the
c
button and confirm with the
;P
In line 'PREROLL TIME', adjust the 'preroll time' with
d
the P or Q button.
D You can also directly enter the 'preroll time' with the
digit buttons .
0-9
D With the
CLEAR (CL)
time' to that of the identified camera recorder type.
e
Confirm with the buton.
OK
f
To end, press the
MENU
button.
P
P =
button.
P
button you can reset the 'preroll
button.
or
35