Philips VR9010 Operating Instructions Manual page 3

&
Front of the set
STANDBY m Standby : To switch off, interrupt function, interrupt TIMER recording
RECORD n Record: To record the programme selected at this moment
PROGRAMME ;
Programme number Plus: Programme number up
PROGRAMME =
Programme number Minus: Programme number down
PLAY G
Playback : To play back a recorded cassette
STOP/EJECT ?
Pause/Stop: To stop the tape, except during TIMER-recording
STILL R
Still picture: To stop the tape and display the actual position on the tape as a still picture
o
Rotary control: turn left: during STOP and STANDBY: rewind, during PLAYBACK: reverse
scanning
turn right: during STOP and STANDBY: wind, during PLAYBACK: forward scanning
Behind the flap at the lefthand corner on the front:
L AUDIO R Audio input socket left/right : To connect a camera recorder or video recorder
(programme number '
VIDEO Video input socket : To connect a camera recorder or video recorder ('
SYNCHRO EDIT EDIT input socket : To connect a suitable camera recorder
MANUAL Manual sound control : To switch between automatic sound control and manual sound
control
E3
')
E3
')
Back of the set
4
Mains socket: To connect the mains cable
AUX IN L R Audio input socket, left/right : To connect a HiFi-set (programme number '
AUX OUT L R Audio output socket, left/right : To connect a HiFi-set
EXT.2 AV 2 Scart socket 2: To connect a satellite receiver, decoder, video recorder, etc.
(programme number '
EXT.1 AV 1 Scart socket 1: To connect the TV set (programme number '
2
Aerial input socket: To connect the aerial cable
3
Aerial output socket: To connect the TV set
AUX
')
E2
')
E1
')