Switching On 'Direct Record - Philips VR9010 Operating Instructions Manual

Switching on 'Direct Record'

When this function is switched on, the video recorder will
automatically record the programme selected on the television
by means of a scart cable.
D The video recorder must be switched off .
D With 'Connecting with scart cable and 'Easy
Link/NexTView', the video recorder will also take the
programme number from the TV set automatically
with the video recorder switched on.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the button. The main menu appears.
MENU
Select the line 'RECORDING FUNCTIONS' with the
c
P = or ;P button, and confirm with the
Select the line 'RECORD SETTINGS' with the
d
button, and confirm with the
;P
Select the line 'DIRECT RECORD' with the
e
;P button.
f
Select the function 'ON' with the
you select 'OFF', the function will be switched off.
g
Confirm with the button.
OK
h
To end, press the
MENU
i
Switch off with the
STANDBY m
j
On the TV set, select the programme number you want
make the recording from.
k
Press the RECORD/OTR n
switched off.
D Don't select another programme number on your TV
set, until the 'search symbol' in the display of your
video recorder disappears. This can take up to one
minute.
D When 'NOTV' appears in the display, the programme
number could not be found. The video recorder
switches off automatically. In this case, read the
section 'Recording without automatic switch-off'.
22
P button.
P =
button.
P
P = or
Q or P button. If
button.
button.
button with the video recorder
or