Table of Contents
Advertisement
6.
MANUAL RECORDING
Use 'Manual Recording' to make a spontaneous recording (for
example, a programme currently being shown).
E If you want to start and stop a recording manually, read
the section: 'Recording without automatic switch-off'.
E If you want to start a recording manually but have it
stopped automatically, read the section: 'Recording with
automatic switch-off'.
E If you want a recording to be controlled automatically by
a satellite receiver, read the section entitled 'Automatic
recording from a satellite receiver'.
Recording without automatic switch-off
a
Insert a cassette.
D The cassette is being checked. Wait until the search
symbol in the display has gone out. More
information on the Tape Manager can be found in
the chapter 'The Tape Manager (TM)'.
b
Use the
;P
or
P =
button to select the programme
number (or channel name) you want to record. On the
display appears:
D Programme numbers 'E1' and 'E2' are for recording
from other sources (through scart sockets
and
EXT.1 AV 1
EXT.2 AV 2
is for recording from the front sockets.
D Programme number 'AUX' is provided for audio
recordings via sockets
c
To start recording, press the
remote control or
RECORD n
the display you will see:
d
Stop recording with the
20
). Programme number 'E3'
.
AUX IN L R
RECORD/OTR n
button on the
on the video recorder. On
STOP h
button.
Recording with automatic switch-off
(OTR one-touch-recording)
a
Put a cassette in the machine.
D The cassette is being checked. Wait until the search
symbol in the display has gone out.
b
Use the
or
button to select the programme
;P
P =
number (channel name) you want to record.
c
Press the
RECORD/OTR n
d
Press the
RECORD/OTR n
display on the video recorder shows the desired end time
or length of the recording.
D To cancel this information, press the
button.
Protecting your recordings
So that you don't accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
again with sticky tape or slide the special tab to the right.
Auto-assembling
You can use the auto-assembling function to join individual
recordings without any major picture disturbance between
them.
a
While the cassette is playing, search for the correct
position on the tape.
b
Stop the cassette by pressing the
'
9
' will appear in the display.
c
Now start recording as usual by pressing the
button on the remote control.
RECORD/OTR n
button on the remote control.
button again and again until the
CLEAR (CL)
button.
STOP h
Hide quick links:
Advertisement
Table of Contents
