Table of Contents
Advertisement
Selecting the recording speed (SP or LP)
LP allows to double the recording duration on tape (for
example six hours instead of three hours on a E180
cassette)
1.
1.
Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.
Press
. The main menu will appear.
MENU
3.
3.
Select 'RECORD SETUP' using
and confirm with
4.
4.
Select 'RECORD SPEED' using
5.
5.
Select the required recording speed with
.
B 1
SELECT K L CHOOSE B
RECORD SPEED
DIRECT RECORD
RECORD LINK
END=EXIT
6.
6.
To end, press
STATUS/EXIT
'SP'/'LP' /'AUTO'
'SP': StandardPlay (normal recording speed) offers
the usual first-class picture quality.
'LP': LongPlay (half recording speed, double record-
ing time). 6 hours can be recorded on a 3-hour cas-
sette (E180) with a somewhat reduced picture quality.
'AUTO': AUTOmatic Long Play. If there is not enough
space on the tape to record a programmed recording
in standard speed, the recording is automatically
done in 'LP'. (Longplay). Otherwise, the recording
speed will be 'SP' (Standardplay).
Automatic controlled recording from
a satellite receiver (RECORD LINK)
This function automatically starts recording on the
switched-off video recorder when a video signal is
recognised through the connected scart cable. If your
satellite receiver has a programming function, the
recording will start automatically (as long as the
satellite receiver is switched on).
1.
1.
Use a scart cable to connect scart socket
AV2(DECODER) on the video recorder to the
corresponding scart socket on the satellite
receiver.
2.
2.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
3.
3.
Press
. The main menu will appear.
MENU
4.
4.
Select 'RECORD SET UP' with
and confirm with
5.
5.
Select 'RECORD LINK' with
6.
6.
Select function 'ON' with
SELECT K L CHOOSE B
RECORD SPEED
DIRECT RECORD
RECORD LINK
END=EXIT
K B
B 1
.
K B
[SP]
[OFF]
[OFF]
.
K B
.
B 1
K B
L C
.
B 1
[SP]
[OFF]
[OFF]
7.
7.
To end, press
8.
8.
Insert a cassette.
9.
9.
Programme the satellite receiver with the
required information (programme number of
the TV channel, start time, end time).
If necessary, please see the operating
instructions for your satellite receiver.
Switching off 'Record Link'
To switch off the function, select 'OFF' with
L C
10.
10.
Switch off the video recorder with
.
L C
STANDBY/ON y y
The video recorder is now ready to record. The
beginning and end of the recording is controlled
via scart socket AV2(DECODER).
'Direct Record'
With Direct Record, you can record the right TV
channel in seconds even if your video recorder is
switched off. If the recording is started manually,
the video recorder uses the current TV channel
set on the TV. You will find more information on
how to switch 'Direct Record' on or off in the next
section. Make sure that your video recorder
socket (AV1/TV) and the TV are connected by a
scart cable.
1.
1.
On the TV, select the programme number you
want make the recording from.
2.
2.
Press
switched off.
3.
3.
Stop recording with
How does Direct Record work?
The video recorder compares the TV channel selected
on the TV set with its stored TV channels via the scart
cable. If the same TV channel is found, it switches the
video recorder to the corresponding programme num-
ber and starts recording. Please do not change the TV
channel on the TV set during the search so as not to
affect the process.
Switching 'Direct Record' on or off
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
MENU
3.
3.
Select 'RECORD SET UP' with
and confirm with
4.
4.
In 'DIRECT RECORD', select 'OFF' (Direct
Record off) or 'ON' (Direct Record on) with
L C
B 1
.
5.
5.
To end, press
6.
6.
Switch off with
SELECT K L CHOOSE B
END=EXIT
10
.
STATUS/EXIT
.
with the video recorder
RECORD/OTR I
.
L C
. The main menu will appear.
.
B 1
.
STATUS/EXIT
STANDBY/ON y y
RECORD SPEED
[SP]
DIRECT RECORD
[OFF]
RECORD LINK
[OFF]
.
B 1
K B
L C
.
EN
Hide quick links:
Advertisement
Table of Contents
