Omron F3SJ-E0185P25 User Manual page 102

Wiring/Installation
If the length of the F39-JDA single-ended connector cable is insufficient, use 1 or more F39-JDB
double-end connector cables to extend the length, as required. The total cable extension length must
be 30 m max.
<Connection example>
 Reduced Wiring Connector System
A combination of a double-ended cable for an emitter (F39-JDB-L), a single-ended cable for a
receiver (F39-JDA-D), and a reduced wiring connector (optional: F39-CN5) can be used for a
reduced wiring system.
Cable with connectors on both ends
F39-JD B-L (grey)
 Cable for reduced wiring (optional: F39-JDBA)
A set of two cables; a double-ended cable for an emitter (F39-JDB) and a single-ended cable for a
receiver (F39-JDA-D). Used in combination with a reduced wiring connector (optional: F39-CN5).
See the following page for details of a double-ended cable for an emitter (F39-JDB-L) and a single-
ended cable for a receiver (F39-JDA-D).
Double-ended connector cable p.85
Single-ended connector cable p.84
 Reduced wiring connector (optional: F39-CN5)
13.6
32.1
17.7
18
F3SJ-E/B
86
User's Manual
Emitter Cable is gray
Double-ended connector cable
Receiver Cable is black
F3SJ F3SJ
Emitter Receiver
Reduced Wiring
Connector
F39-CN5
Cable with connector on one end
F39-JD A-D (black)
(52)
24.7 13.6 φ 8 (SPOT FACING 2)
12
φ 4.5
10
Model F39-JD B-L(Gray)
Single-ended connector cable
Model F39-JD B
Model F39-JD B-D(Black)
Model F39-JD A-L(Gray)
Model F39-JD A
Model F39-JD A-D(Black)