Peripherals; Peripheral Device Connectors - Sharp PC-TN1 Series Operation Manual

Peripherals

This chapter describes how to use peripheral devices with your computer. You can
connect a floppy disk drive unit, a printer, an external monitor, an IEEE1394 device, or
other devices to your computer. To ensure proper use, be sure to read the instructions
for each peripheral device before connecting it to your computer.

Peripheral Device Connectors

Your computer has connectors for peripheral devices, shown on the next page. For
connection, refer to the section explaining each device, or contact your dealer.
• Be sure to turn off your computer and the peripheral devices before
connecting them (except when inserting a PC card or a CF card, or
connecting USB devices, an IEEE 1394 device, etc.).
• Confirm the peripheral device you will connect is Windows XP
compatible.
• Some devices have to be turned on after your computer is turned on.
• Some devices require that you install the drivers before use (You may
need to connect the optional external floppy disk drive unit or an
external optical drive unit to install the drivers.)
CHAPTER 5
5
5-1