Using Peripherals - Sharp PC-MR70 Manual

Peripherals
This chapter describes how to use peripheral devices with your computer. You can
connect a printer, external monitor, external keyboard, mouse, or other device to the
parallel, RS-232C serial, USB or keyboard/mouse ports. To ensure proper use, be
sure to read the instructions for each peripheral device before connecting it to your
computer.

Using Peripherals

You can use the peripheral devices shown on the next page. For more details, refer
to the section explaining each device, and contact your dealer.
Connecting Peripheral Device
1. Turn off the computer and the peripheral device (except when connecting USB
devices).
2. Connect the peripheral device to the computer. If the connector has screws,
tighten them.
3. Turn on the peripheral device; then, turn on the computer.
Be sure to turn off the computer and the peripheral device before
connecting them (except when connecting USB).
Make sure that the peripheral devices you will connect are compliant
to Windows Me.
Some devices have to be turned on after the computer is turned on.
Some devices require that you install drivers before use.
CHAPTER 4
4-1
4