Sharp PC-TN1 Series Operation Manual page 74

Displaying on External Monitor
To display the image on an external monitor, you may need to install the driver for
the external monitor. Before using the external monitor, refer to the manual included
with it.
Switching Display
1. In Display Properties dialog box, select Settings tab; then, click Advanced button.
2. Select Intel(R) Extreme Graphics tab; then, click Graphic Properties....
3. Select an output display you want to view the image and click OK.
4. Click OK three times.
• You can also switch the display with Fn+F5 ( ).
• While playing video or animation, you may not be able to switch the
display.
Disconnecting External Monitor
1. Turn off your computer and the external monitor.
2. Loosen the screws of the monitor cable if it has, and remove the cable from your
computer and the monitor.
3. Close the cover.
Be sure to close the cover to avoid damaging the external monitor port.
5
5-7