Parameter Data Check - GE AF-650 GP Operating Instructions Manual

About Frequency Converter P...
Parameter
E-24 Function Relay No operation
AN-15 Terminal 53
High Ref./Feedb.
Value
AN-50 Terminal 42
Output
H-04 Auto-Reset
(Times)
Table 5.1 International/North American Default Parameter Settings
Note 1: P-07 Motor Power [kW] is only visible when K-03 Regional
Settings is set to [0] International.
5 5
Note 2: P-02 Motor Power [HP], is only visible when K-03 Regional
Settings is set to [1] North America.
Note 3: This parameter is only visible when K-02 Motor Speed Unit is
set to [0] RPM.
Note 4: This parameter is only visible when K-02 Motor Speed Unit is
set to [1] Hz.
Note 5: The default value depends on the number of motor poles. For
a 4 poled motor the international default value is 1500RPM and for a
2 poled motor 3000RPM. The corresponding values for North America
is 1800 and 3600RPM, respectively.

5.5 Parameter Data Check

Changes made to default settings are stored and available
for viewing in the quick menu along with any
programming entered into parameters.
1. Press [Quick Menu].
2. Scroll to Parameter Data Check and press [OK].
3. Select Since Factory Setting to view all
programming changes or Last 10 Changes for the
most recent.
34
AF-650 GP Operating Instructions
International North American
default parameter default parameter
value value
No alarm
50 60
No operation Speed 4-20mA
Manual reset Infinite auto reset