User Interface
4.1.2 Setting Keypad Display Values
The display area is activated when the frequency converter
receives power from mains voltage, a DC bus terminal, or
an external 24V supply.
The information displayed on the Keypad can be
customized for user application.
•
Each display readout has a parameter associated
with it.
•
Options are selected in main menu K-2#
•
The frequency converter status at the bottom line
of the display is generated automatically and is
not selectable. See 7 Status Messages for
definitions and details.
Display
Parameter number
1.1
K-20
1.2
K-21
1.3
K-22
2
K-23
3
K-24
AF-650 GP Operating Instructions
4.1.3 Display Menu Keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Key
Status
Default setting
Speed [RPM]
Motor Current
Power [kW]
Frequency
Reference [%]
Quick Menu
Main Menu
Alarm Log
Function
Press to show operational information.
•
Press repeatedly to scroll through each
status display
▲
•
Press and hold [Status] plus [
adjust the display brightness
•
The symbol in the upper right corner of the
display shows the direction of motor
rotation and which set-up is active. This is
not programmable.
Allows access to programming parameters for
initial set up instructions and many detailed
application instructions.
•
Press to access Quick Start for sequenced
instructions to program the basic frequency
controller set up
•
Press to access Trending for realtime logging
on keypad display.
•
Press to access Parameter Data Check for
changes in parameter data set.
•
Follow the sequence of parameters as
presented for the function set up
Allows access to all programming parameters.
•
Press twice to access top-level index
•
Press once to return to the last location
accessed
•
Press and hold to enter a parameter
number for direct access to that parameter
Displays a list of current warnings, the last 10
alarms, and the maintenance log.
•
For details about the frequency converter
before it entered the alarm mode, select the
alarm number using the navigation keys
and press [OK].
4
4
▼
] or [
] to
27