Changing Light Bulb; 六.移除燈泡 - Pacific PR-2107 Use, Care And Installation Manual

VI. Removing Light Bulb
Attention:
When the range hood is activated or has been running for a long time,
be careful when handling the light bulb as it may be too hot to handle.
Please wait until the light bulb cools down and then remove it.
Please double check to make sure the power supply to the range hood
is shut off and the light bulb is cool before removing it.
Remove the two aluminum mesh filters and detach the electrical wire
connected to the light bulb. Then remove the lighting panel so you can
remove the screws.
Each light bulb has two screws that secure it (see picture below). After
removing the screws, the light bulb will come off.
Please contact dealer to purchase new light bulbs.
screw
screw
Inside of the panel
6.
六.移除燈炮
注意：
當油煙機在運轉或經過長期運轉後請小心燈炮高溫。並請等待冷卻後再移除燈泡。
請再三確定油煙機電源關閉以及燈泡冷卻後再行移除。
移除兩片鋁網，拔除內部燈泡連結電線。
接著移除燈飾板以方便卸下螺絲。
每個燈泡皆有兩個螺絲（位置如下圖），卸下螺絲後燈泡將自行掉落。
請洽經銷商購買新燈泡。
螺絲
螺絲
燈飾板內部
6.