Connecting A Vcr/Dvd Player - Philips DVDR615 User Manual

Connecting a VCR/DVD player

You will need this connection if you want
to record the video tapes or discs to a
DVD+R(W)s.
Option 1
1
Use a component video cable (red/green/
blue) to connect the DVD recorder's
COMPONENT VIDEO (IN-EXT1)
input jacks to the corresponding
component video output jacks on the
VCR/DVD player.
2
Use an audio cable (red/white) to
connect the DVD recorder's AUDIO
L/R (IN-EXT1) input jacks to the audio
output jack on the VCR/DVD player.
VCR/DVD player
Before start operating, press TUNER on
the remote control, then press 3 4 to
select 'EXT1' as the input channel.
For recording, see pages 39~40.
DVDR610_615_37_Engfinal434
Connecting Additional Devices
Y
Pr
Pb
COMPONENT
VIDEO OUT
17
Option 2
1
Use a S-video cable to connect the DVD
recorder's S-VIDEO (Y/C) (IN-EXT2)
input jack to the corresponding S-VHS
output jack on the VCR/DVD player (as
shown on the below illustration.)
OR
Use a video (CVBS) cable to connect the
DVD recorder's VIDEO (CVBS)
(IN-EXT2) input jack to the
corresponding video output jack on the
VCR/DVD player.
2
Use an audio cable (red/white) to
connect the DVD recorder's AUDIO
L/R (IN-EXT2) input jacks to the audio
output jack on the VCR/DVD player.
VCR/DVD player
Before start operating, press TUNER on
the remote control, then press 3 4 to
select 'EXT 2' as the input channel.
For recording, see pages 39~40.
Helpful Hints:
– Most prerecorded video cassettes and
DVDs are copy-protected. If you try to copy
them, the message 'COPY PRO' appears on
the display panel.
– Connect the DVD recorder directly to the TV
set. If there is a video recorder or an
additional device in between, the picture
quality may be poor because of the copy
protection system built into the DVD recorder.
8/16/04, 4:04 PM
(cont'd)
Y
Pr
Pb
COMPONENT
VIDEO OUT
17
3139 246 14221