Recording From An External Device (Camcorder/Vcr/ Dvd Player) - Philips DVDR3360H User Manual
Hard disk/dvd recorder
Hide thumbs
Also See for DVDR3360H:
- User manual (99 pages) ,
- Service instructions manual (15 pages) ,
- Service manual (83 pages)
Table of Contents
Advertisement
A
Connect the DV camcorder to the
DV IN jack on the front panel of this
recorder.
B
Find the footage on the DV camcorder
that you want to start recording from
and set the camcorder to pause mode.
C
Turn on the TV to the correct program
number for the recorder (e.g. 'EXT', '0',
'AV'.)
D
Turn on the recorder and press DV on
the remote control.
An information box will be displayed.
System State:
Stop
DV State:
Record to Hard Disk As
Standard Play
Elapsed Time:
00:00:00
Remaining Time:
Press SELECT repeatedly to change the
mode of record quality.
E
â
Press REC
to start recording and
press the PLAY button on the DV
camcorder to start playback.
To pause the recording, press PAUSE Å.
To resume recording, press PLAY
again.
A new chapter marker is created
after recording restarts.
F
To stop recording, press STOP
A new title will be created when you
begin another recording.
To record directly to a recordable
DVD disc, see page 35.
TIPS:
Set the appropriate mode of record quality for HDD recording. The same record quality will be transferred
from HDD to a recordable DVD, see page 30~31.
Record on Hard Disk
Stop
00:00:00
A
B
Ç
.
C
D
Recording from an external
device (Camcorder/VCR/
DVD player)
A copy protection system has been built
into this recorder to prevent the transfer
of data from pre-recorded DVDs or
other copy protected material onto the
recordable DVD. You can only store the
contents in the temporary HDD storage
of this recorder.
Note: Set the preferred mode of record
quality before proceeding, see "Before
Recording - Default Recording Settings."
PAUSE
Connect the external device to this
recorder (see pages 17 ~ 20).
Turn on the TV to the correct program
number for the recorder (e.g. 'EXT', '0',
'AV').
Press STANDBY-ON
the recorder.
If no TV program appears on the
screen, press TUNER on the remote
control.
Press SOURCE repeatedly to select the
correct input channel that matches the
connected jack of the device.
– { EXT 1 }
: EXT 1 jack at the back.
– { CAM 1 } : VIDEO jack on the
front.
– { CAM 2 } : S-VIDEO jack on the
front.
(continued)
REC
SOURCE
TUNER
2
to turn on
33
Advertisement
Table of Contents
