Connecting To Additional Devices; Using The Input Jacks (In-Ext 1; Connecting A Satellite Receiver/Cable Box - Philips DVDR615 User Manual

Connecting to Additional Devices

Using the input sockets
(IN-EXT 1 or IN-EXT2)
You can connect a video cassette
recorder (VCR,) DVD player, decoder,
satellite receiver or cable box to the
input jacks at the back of the DVD
recorder (IN-EXT 1 or IN-EXT 2.)
The possible connection is depending on
the capabilities of the additional devices.
Switching between S-Video input and
Video (CVBS) input takes place
automatically. If both are used for
connecting to external devices, the signal
from S-Video socket has priority.
The COMPONENT VIDEO (IN-EXT1)
jacks are designed only for 'interlaced'
signals. Progressive Scan input signals
cannot be processed by the DVD
recorder.
16
DVDR610_615_37_Engfinal434
Connecting a Satellite Receiver/
Cable Box
1
If your Satellite Receiver/Cable Box has
only a single antenna output (RF OUT or
TO TV,) use the antenna cable to connect
it with the ANTENNA input jack at the
back of the DVD recorder.
2
For complete connection to your TV set,
see pages 11~15 for details.
G
Alternatively, you can connect it to the
VIDEO (CVBS) (or S-VIDEO (Y/C))
and AUDIO L/R input jacks at the back
of the DVD recorder if your Satellite
Receiver/Cable Box has the same output
jacks.
➜
TUNER on the remote control, then
press 3 4 to select 'EXT1' as the input
channel.
16
To watch/record the programs, press
INT IN TO TV VIDEO AUDIO OUT
OUT R
8/16/04, 4:04 PM
Satellite
Receiver/
Cable Box
Satellite
Receiver/
Cable Box
L
CH3 CH4
3139 246 14221