Table of Contents
Advertisement
7.5.1 Submenu <Motion Detection><<Settings>>
F
V
IELD
ALUES
Suppression
• Standard
• Stable
• None
Target Size
• 1 h x 1 v
(horizontally
• 1 h x 2 v
by vertically)
• 2 h x 1 v
• 2 h x 2 v
Target Direction
• All (1)
• All (2)
• Up
• Down
• Left
• Right
Target Speed
0 to 85 seconds
Min, Max
Sensitivity
[Between 100 (high)
and 1 (low)]
7.5.2 Submenu <Motion Detection><<Active Zones>>
When Edit is selected, a frozen video image from the selected camera appears (by default, the entire area is an active
zone).
Use the DOWN arrow to move the cursor down into the image, then to the desired area. The light blue overlay
indicates the selected active region(s); multiple active zones are permitted. Press OK to toggle the cursor between
modes (see below). When complete, select Save. To deselect, press Clear All.
C
URSOR
• Move - No change
• Activated - Selected
• Clear - Deselected
D
EFAULT VALUE
Standard
2 h x 2 v
All (1)
0–40 seconds
70
M
:
ODES
20
E
XPLAINED
• Standard: ignores small lighting
changes (less than 25%)
• Stable: ignores large lighting
changes (less than 50%)
• None: responds to all changes;
recommended for indoor applications
Defines size of motion grid
• All (1): detects motion in any
direction
• All (2): detects motion in any
direction, but helps suppress false
motion alarms
• Up, Down, Left, or Right -
alarm only on specific motion
Alarms if object passes through camera's
field-of-view within range
Higher value is more sensitive to motion
A
:
CTIONS
• Set All - Marks all zones active
• Clear All - Marks all zones inactive
• Save - Exits screen and saves settings
• Cancel - Exits screen without saving settings
Advertisement
Table of Contents
