Submenu <Alarms><<Inputs; Submenu <Alarms><<Outputs; Motion Detection - Philips Hi-Q Digital Video Recorders Installation Instructions Manual

7.4.1 Submenu <Alarms><<Inputs>>
F
IELD
Auxiliary Alarm Input Polarity -
Cameras 1– 4 individually
Auxiliary Alarm Recording
Follows Contact
Pre-alarm Time
Post-alarm Time:
Video Motion
Video Dark
Auxiliary
-Touch
1
NOTE: Use 1-Touch Alarm (front panel) to trigger alarm recording for the duration of the programmed POST
ALARM time. Continue alarm recording by pressing 1-Touch Alarm again.
7.4.2 Submenu <Alarms><<Outputs>>
F
IELD
Warning Beep
Relay Output Polarity -
Cameras 1– 4 individually
Relay Activation:
Dwell Time -
Cameras 1– 4 individually
Follows Mode for Aux Alarm -
7.5

Motion Detection

Motion detection causes the system to alarm based on motion through a zone. Sensitivity, speed, and direction
settings can be set via these menus.
V
ALUES
• Normally Open
• Normally Closed
• Enabled
• Disabled
[1 to 60 seconds]
[1 to 60 minutes]
V
ALUES
• Enabled
• Disabled
• Normally Open
• Normally Closed
[3 to 60 seconds,
1 second increments]
• Enabled
• Disabled
19
D V
EFAULT ALUE
Normally Open
Disabled
30 seconds
1 minute
D V
EFAULT ALUE
Enabled
Normally Open
5 seconds
Disabled