General Settings - Philips DVDR3360H/97 User Manual

Step 3: Installation and Setup

GENERAL settings

Auto Program
SETUP MENU - GENERAL
Auto Chapter Marker 5min.
Record Quality SP
Auto Program Search
Manual Program
Edit
Sort
OK
Manual Program
Manual Program
Program Number P001
Name C h 0 0 1
Frequency
0 5 8 . 9 8 Mhz
Fine Tuning
Standard PAL B/G
NICAM On
Audio Dual A
Skip No
OK OK CANCEL OK
22
(underlined options are the factory default settings)
Select to start automatic TV channel programming.
1) Use
keys to highlight { Auto Program - Search } and
press .
A warning message will appear.
2) Select
and press OK on the remote control
OK
OK
The automatic TV channel search will start. This process may
take several minutes. Once complete, the total number of
channels found will appear on the TV.
Select to modify your preset TV channels.
1) Use
keys to highlight { Manual Program - Edit } and
press .
The modify channel options will be displayed.
2) Use
keys to select one of the options and press
{ Program Number } – Use CH+/ CH– to select by the program
number for modifying.
{ Name } – Use
modifying. Press OK on the remote control to
confirm the selection.
{ Frequency } – Select this to adjust the frequency of the channel.
– Use
use the numeric keypad 0-9 to change the
frequency. Press OK on the remote control to
confirm the setting.
{ Fine Tuning }– Select this to fi ne-tune the TV channel manually if
the reception is poor.
– Use
{ Standard } – Select this to set the system that produces the least
distortion of picture and sound. Press OK on the
remote control to confirm the setting. (See chapter
"TV System Guide" at the back of this manual for
information.)
{ NICAM } – Select this to receive dual language broadcasts and to
improve the sound quality of the TV channel.
– Use
OK on the remote control to confirm the setting.
(continued)
to select by the channel name for
keys to search for the next frequency or
keys to fi ne-tune the frequency.
keys to select { On } or { Off }, then press
.