Philips Hi-Q Digital Video Recorders Installation Instructions Manual page 26

Real time digital video recorders
Table of Contents

Advertisement

4. Select Find Now.
Selecting the time/date plays back the video. If search criteria was entered, the Playback Search Results screen
appears as shown at right.
I
V
TEM
ALUES
Devices to
Disk, Archive
Search
Date from
Date Value
Date to
Date Value
Time from
Time Value
Time to
Time Value
Cameras
Cameras 1, 2, 3, and 4
Alarms
Motion, Dark, Vid Loss,
Aux, 1-Touch
Find Now
Search Results screen
is displayed
Exit
Reverts to live video mode
* TIP: Date From can be set to display the earliest video from the archive device. To do this, specify a date that is out of range
(like the year 1999), then press Find Now.
5. Select the desired video for playback. At the completion of
playback, the Playback Search Results screen is presented.
6. Select another video or exit search.
IMPORTANT NOTES:
• If searching a tape while in Continuous or Event Only
archive mode, you must first acknowledge the message to
take the tape device off-line. Video being recorded will be
identified for future archiving.
• If in Event Only archive mode, searching tapes may take
additional time due to the increased number of tape indices.
• When searching an archive tape, the tape indices are stored
on the unit's hard drive for faster retrieval.
• If the search screen is exited or the tape is ejected, its indices
are purged from the system, so be sure that the current
search is complete before exiting.
• While in playback mode, press STOP to revert to the
previous Playback Search screen. Press STOP again to exit
and return to live mode.
Playback Search Results Options:
• Play: The selected alarm video is played.
• Archive: The archive box is displayed (see Section 10).
If Continuous Archive is set, Archive is disabled on this menu.
• New Search: Returns to the search screen. Current search parameters are stored as the default search criteria.
• Cancel: Removes the pop-up menu from the screen and leaves the item highlighted.
• Exit: Exits the playback function.
D
V
EFAULT
ALUE
Disk
Current Date*
Current Date
Current Time –
1 minute*
Current Time
All Cameras
None Checked
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hi-q

Table of Contents