Table of Contents
Advertisement
5
QUICK START GUIDE (INITIAL POWER-UP)
The default setting (Profile 1 only is in use) has all four channels recording high quality real time video. To change
these settings, proceed to Programming the Hi-Q via the Menu (Section 7). Refer to Appendix B for all default
settings.
1. Install the Hi-Q in a well ventilated location, ensuring that cooling vents are not blocked. Do not place the unit
on top of other equipment unless rack mounted.
2. Connect camera(s).
3. Connect audio (optional; See Figure 3.2 for configuration).
NOTES:
• By default, audio recording is disabled to prevent unintentional audio recording that could violate legal
restrictions. The administrator must enable the audio feature if desired.
• Audio recording occurs only if Channel 1 is recording video.
4. Attach a monitor to MON A for viewing Hi-Q configuration menus.
5. Locate the in-line surge protector packaged with the Hi-Q, and install it between the Hi-Q unit and the power
cord (see installation example below).
6. Apply power and select language, date, and time (see below). Time must be entered in 24-hour format.
7. The Hi-Q will now autodetect PAL or NTSC cameras.
NOTE: You must use the Shut Down procedure to power down the Hi-Q (Section 7.9.1) or data may be lost.
13
Advertisement
Table of Contents
