ZyXEL Communications NAP102 User Manual page 28

The wireless security is not following the re-authentication timer setting I specified.
If a RADIUS server authenticates wireless stations, the re-authentication timer on the RADIUS server has
priority. Change the RADIUS server's configuration if you need to use a different re-authentication timer
setting.
How do I remove the NAP203 or NAP303 indoor AP from its mounting bracket?
• Find the down arrow close to the Ethernet ports, then use a thin flat tool (for example, a flat screw
driver) to lift up a clip beneath the down arrow.
• Turn the NAP203 or NAP303 indoor AP counter-clockwise.
Chapter 5 Troubleshooting
NAP Series User's Guide
28