ZyXEL Communications NAP102 User Manual page 12

Figure 4 NAP102 LED
The following are the LED descriptions for your NAP102.
Table 3 NAP102 LED
COLOR STATUS
Red Slow Blinking (On for 1s,
Off for 1s)
Green On
Red Off
Green On
Red Off
Green On
Red Slow Blinking (blink for 3
times, Off for 3s)
Green On
Red Off
Green Slow Blinking (On for 1s,
Off for 1s)
Red On
Green Off
Red Fast Blinking (On for
50ms, Off for 50ms)
Green Off
Red Slow Blinking (blink for 3
times, Off for 3s)
Green Off
Chapter 1 Introduction
DESCRIPTION
The NAP is booting up.
The NAP is ready for use.
The NAP's wireless interface is activated.
The NAP is searching for (discovering) the NCC.
The NAP is connected to the NCC, but not registered.
The NAP failed to boot up or is experience system failure.
The NAP is undergoing firmware upgrade.
The Uplink port is disconnected.
NAP Series User's Guide
12