Nap102 - ZyXEL Communications NAP102 User Manual

Table 2 NAP203 LEDs (continued)
LED
WLAN
WLAN
UPLINK
LAN
Locator

1.5.3 NAP102

The following are the LED descriptions for your NAP102.
Chapter 1 Introduction
COLOR STATUS
Green On
Amber On
Off
Green On
Amber On
Off
Amber/ On
Green
Blinking
Off
Amber/ On
Green
Blinking
Off
White Blinking
Off
NAP Series User's Guide
DESCRIPTION
The antenna switch is set to "Ceiling" for the radio.
The 2.4 GHz WLAN is active.
The antenna switch is set to "Wall" for the radio.
The 2.4 GHz WLAN is active.
The 2.4 GHz WLAN is not active.
The antenna switch is set to "Ceiling" for the radio.
The 5 GHz WLAN is active.
The antenna switch is set to "Wall" for the radio.
The 5 GHz WLAN is active.
The 5 GHz WLAN is not active.
Amber - The port is operating as a 100-Mbps connection.
Green - The port is operating as a Gigabit connection
(1000 Mbps).
The NAP is sending/receiving data through the port.
The port is not connected.
Amber - The port is operating as a 100-Mbps connection.
Green - The port is operating as a Gigabit connection
(1000 Mbps).
The LAN port is sending/receiving data through the port.
The LAN port is not connected.
The Locator is activated and will show the actual location
of the NAP between several devices in the network.
The Locator function is off.
11