Step 1: Basic Recorder Connections; Connecting The Antenna Cables - Philips DVDR5350H User Manual

Cable Satellite Antenna
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes using this
recorder. If the antenna signal is
connected via a Cable Box or Satellite
Receiver, ensure that these devices are
turned on in order to watch or record
the cable programmes.

If you want to connect to a VCR
and/or a separate Cable Box/
Satellite Receiver, see page 19~21 for
other possible connections.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
dvdr5350H_EU_Eng537.indd 15

Step 1: Basic Recorder Connections

A
B
Connect the existing Antenna/ Satellite/
A
Cable TV signal (or from the Cable Box/
Satellite Receiver, labelled as RF OUT or
TO TV) to the ANTENNA
on the recorder.
Use the supplied RF coaxial cable to
B
connect the TV
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
Helpful Hint:
– Depending on how you have currently
connected your TV channel (directly from an
off-air antenna or cable box or VCR), you'll
have to disconnect some of the cables before
you make the antenna connection.
TV
socket
socket on the
15
2005-09-16 2:25:19 PM