Before Recording - Philips DVDR5350H User Manual

Philips user manual dvd recorder / hard disk dvdr5350h
Hide thumbs Also See for DVDR5350H:
Table of Contents

Advertisement

Recordings (underlined options are the factory default settings)
Record mode
Language
Auto protect
Chapters
SAT record
Direct rec.
dvdr5350H_EU_Eng537.indd 35

Before Recording

The recording mode defines the picture quality of recordings and the
maximum recording time on the HDD (hard disk drive), see page 34 on
'Recording Mode Setting Chart'.
Important! When copying from HDD to a recordable DVD, the
recording mode of the selected recording in the HDD will automatically
be transferred. Selecting another recording mode is not possible.
The factory default setting is SP.
Selects the recording language to be used for TV programmes which are
transmitted an additional audio language. For example, if a programme is
available in English and Spanish, with Spanish being the additional language
option.
{ Lang I }
– Original broadcast language.
{ Lang II }
– Additional audio language.
With this feature, the recordings on the HDD will not be automatically
deleted if there is no space for new recordings.
{ On }
– Deletes and edits on the recorded titles are not possible.
{ Off }
– Turns off the function.
Automatically divides a recording (title) into chapters by inserting chapter
markers at a specific interval. This enables you to access a specific point in
the recording quickly.
{ Off }
– No chapter marker is inserted in the recording.
{ Standard } – Chapter markers are inserted automatically during
recording at approximately five (5) minutes interval.
{ Smart }
– This setting is only available for the DV camcorder
recording. A chapter marker is inserted whenever
there is a break in the recording, for example, when
the recording is stopped or paused and restarted again.
This feature is only available if you have connected a Satellite Receiver or
other devices to the EXT 2 AUX-I/O scart socket of this recorder, see
page 38 for more information.
{ Off }
– Turns off the function.
{ EXT2 }
– Enables this recorder to start and stop recording when
a signal is received from the connected device.
With this feature, you can immediately record the programme that you
are viewing on the TV by pressing REC button without the needs of
turning on this recorder, see page 38 for more information.
{ On }
– Enables recording directly from the TV display.
{ Off }
– Turns off the function.
(continued)
35
2005-09-16 2:26:00 PM

Advertisement

Table of Contents
loading

Table of Contents