Philips DVDR5350H User Manual page 23

Option 2: Using the S-VIDEO In or
VIDEO In socket
Use the S-VIDEO connection if you have
a Hi8 or S-VHS(C) camcorder. It
provides very good picture quality.
Alternatively, you can use VIDEO
connection if your camcorder has only a
single video output (Composite Video,
CVBS). It provides good picture quality.
Connect the S-VIDEO or VIDEO
A
socket at the front panel of the recorder
to the corresponding S-VHS or Video
output socket on the camcorder.
Press CAM on the remote control

repeatedly to select 'CAM1' when using
this input source.
Use an audio cable (red/white - not
B
supplied) to connect the AUDIO L/R
sockets at the front panel of the recorder
to the audio output socket on the
camcorder.
TIPS: Refer to your optional connected devices' user manual for others possible connections.
dvdr5350H_EU_Eng537.indd 23
Step 2: Optional Connections
A
OR
B
Helpful Hint:
– If you connect your camcorder to the scart
socket at the rear of this recorder, press
CAM on the remote control to select
{ EXT1 } or { EXT2 } as the input source.
(continued)
23
2005-09-16 2:25:33 PM