Timer Recording (Showview System) - Philips DVDR5350H User Manual

Record to Hard Disk
Timer recording (ShowView
system)
This is a simple timer programming
system. To use it, enter the ShowView
programming number associated with
your television programme. You can find
this number in your TV listings magazine.
All the information needed by this
recorder for programming is contained in
the programming number.
Turn on the TV to the correct
A
programme number for the recorder
(e.g. 'EXT', '0', 'AV').
Turn on the recorder and press TIMER
B
on the remote control.
The GUIDE Plus+ schedule screen

appears.
Press the Red button on the remote
C
control for
The ShowView entry screen appears.

Use the alphanumeric keypad 0-9 to
D
enter the ShowView programming
number and press OK to confirm. (e.g.
5-312-4 or 5,312 4, key in '53124').
The GUIDE Plus+ system is decrypting

the programming number and
transforming it into a scheduled event.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
40
dvdr5350H_EU_Eng537.indd 40
(continued)
.
= = = = = = = =

If incorrect programming number is
entered, you have to select the correct
programme number manually. Follow the
instructions on the TV to edit the date
and time.
The default recording settings are
E
displayed in the pink tile. To make
changes, press the matching colour coded
button on the remote control.
{ Frequency }
Press the Red button on the remote control
repeatedly to select the repeat recording
setting (Once, Weekly, M-F).
{ Timing }
Press the Green button on the remote
control repeatedly to select adding extra time
(+0, +10, +20, +30) to the end of recording or
select VPS/PDC (V-P) function.
Note: VPS/PDC is not available for external
receiver.
Press TIMER to confirm and exit the
F
menu.
The ' ' icon will light up on the

TIMER
display panel if a timer recording is set.
If the recorder is not in standby mode,

a notification message will appear before
the timer recording begins.
If you ignore the message, the

recorder will automatically switch to the
respective channel and start recording.
2005-09-16 2:26:14 PM