Connecting The Video Cable - Philips DVDR5350H User Manual

Step 1: Basic Recorder Connections
Option 1

Connecting the video cable

This connection enables you to view the
playback from this recorder. You only
need to choose one of the options below
to make your video connection.
Option 1: Using the Scart socket
(best picture quality)

Use the scart cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
If your TV has the feature of Cinema

Link or a similar feature, ensure that the
scart cable is connected to the scart
socket that supports CINEMALINK on
your TV. All the available TV channels
will automatically be downloaded to this
recorder.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
dvdr5350H_EU_Eng537.indd 16
OR
OR
Option 2
Helpful Hints:
– If your TV displays a selection for the
SCART socket, select 'VCR' as the source for
the SCART socket.
– The EXT2 AUX-I/O socket is intended
only for additional devices.
Option 2: Using the S-Video socket
(excellent picture quality)

Use an S-video cable (not supplied) to
connect the S-VIDEO (Y/C) socket on
the recorder to the S-Video input socket
(or labelled as Y/C or S-VHS) on the TV.
Option 3: Using the Video (CVBS)
socket (good picture quality)

Use a composite video cable (yellow - not
supplied) to connect the VIDEO (CVBS)
socket on the recorder to the video input
socket (or labelled as A/V In, Video In,
Composite or Baseband) on the TV.
(continued)
Option 3
TV
2005-09-16 2:25:22 PM