Canon MB2100 SERIES Online Manual page 445

Important
• When you select the Always Print with Current Settings check box, all settings specified on the
Quick Setup, Main, and Page Setup tabs are saved, and you can print with the same settings from
the next time as well.
• In the Commonly Used Settings window, click Save... to
Note
• If the paper settings on the printer driver differ from the cassette paper information registered on the
printer, an error may occur. For instructions on what to do if an error occurs, see
To check the current printer settings or to apply the printer settings to the printer driver, click Printer
Media Information... from the Quick Setup tab, and specify the settings in the dialog box that
appears.
For details about the cassette paper information to be registered on the printer, see the following:
• Paper Settings on the Printer Driver and the Printer (Media Type)
• Paper Settings on the Printer Driver and the Printer (Paper Size)
Checking Printer Settings and Applying Settings to Printer Driver
1. Open printer driver setup window
2. Click Printer Media Information... on Quick Setup tab
The Printer Media Information dialog box appears.
3. Select Paper Source
From Paper Source, check the setting or select a new paper source.
The current printer settings appear in Media Type and Page Size.
4. Apply settings
To apply the printer settings to the printer driver, click Set.
Note
• If the media type on the printer is set to Hagaki, Ink Jet Hagaki, or Hagaki K or if the output
paper size on the printer is set to 2L/5"x7"(13x18), click Set to display the dialog box.
Select the media type and paper size that matches your purpose, and then click OK.
• If the media type and the output paper size are not set on the printer, Set will be grayed out and
cannot be clicked.
• If communication with the printer is disabled, the Printer Media Information... does not appear
or printer media information from the printer cannot be obtained.
register the specified
445
settings.
"Paper Settings."