Canon MB2100 SERIES Online Manual page 903

◦ Manual/auto switch
If you select ON, the printer automatically receives faxes after the external device rang a specified
length of time.
You can specify the length of time until automatic reception is started.
◦ User-friendly reception
If you select ON, the printer automatically switches from telephone calling to fax reception by
detecting the fax signal (CNG signal) when you lift the handset of the telephone or the answering
machine answers. When you have an answering machine connected to the printer, select ON to
switch to fax reception automatically after the answering machine answers.
If you select OFF, the printer does not switch from telephone calling to fax reception automatically
even if the printer detects the fax signal (CNG signal). Select OFF if you want the printer not to
switch automatically during a call.
Note
• If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device
rings specified with Incoming ring in FAX only mode is available in TEL priority mode.
If you want to specify the number of times the external device rings in TEL priority mode, select
FAX only mode on the Receive mode settings screen, specify the number of times the external
device rings with Incoming ring, and then switch to TEL priority mode on the Receive mode
settings screen.
• If you subscribe to Duplex Ringing service in Hong Kong, we recommend that Manual/auto
switch be set to OFF.
• Advanced setting in FAX only mode
You can specify the following setting item.
◦ Incoming ring
You can specify the number of times the external device rings when incoming.
• Advanced setting in DRPD
You can specify the following setting items.
◦ DRPD: FAX ring pattern
Sets the distinctive ring pattern of a call that the printer assumes is a fax call.
If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your
telephone company.
Setting DRPD Ring Pattern (US and Canada only)
◦ Incoming ring
You can specify the number of times the external device rings when incoming.
• Advanced setting in Network switch
You can specify the following setting item.
◦ Incoming ring
903