Table of Contents
Advertisement
Electrical connection of the LCD Panels and Starting up
of the Projector
Location of the
LCD Panels
Blue panel
Wear a wrist band which is connected to the ground while handling the static sensitive
Antistatic
parts.
Protection Steps
Before closing the projector, the LCD panels must be electrically connected to the driver
Electrical
board using the ribbon cables. Follow the next procedure :
Connection of the
Panels
Step
How to Close the
The top cover has to be closed before starting up the projector. Continue with the
Top Cover
following steps :
Step
Ribbon Connectors
Green panel
Ribbon Connectors
Action
1
Push the ribboncable into the
connector.
2
Press very carefully on both sides of
the indicated points to lock the ribbon
cable into the connector.
Action
1
Turn the cover until the closed position is reached.
2
Turn both lock screws on each side of the front top cover with a screwdriver
or a coin counter clockwise.
Red panel
- 24 -
Ribbon Connectors
Illustration
Press to unlock
Connector
Press to lock
To be continued on next page
ribbon
connector
cable
Advertisement
Table of Contents
