Connecting Additional Devices - Philips DVDR 80 Owner's Manual

C
You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the
, ,
jacks on the recorder. Switching between jack
automatically. In case both jacks are occupied, the signal at jack
The
signals. Signals using progressive scan cannot be processed by the DVD
Recorder.
You can also connect a video Recorder to the input jack. Please use the
the jacks for SVHS video recorders.
Most pre-recorded video cassettes and DVDs are copy protected. When you attempt to copy
them, the ' ' message will appear in the DVD Recorder display.
a
b Check whether the cable plugs fit correctly.
b If the recording is made from a video recorder, adjust the "tracking"
on the video recorder.
b In case of bad, non-standard video input signals, the DVD Recorder
may not be able to detect the signal.
a
b This occurs when you attempt to copy copy-protected DVDs or
video cassettes. Although the picture on the TV is OK, the recording
is distorted on a DVD+R(W). Copy-protected DVDs and video
cassettes cannot be copied without these disruptions.

Connecting additional devices

and the
and
jacks are only used for 'interlaced'
,
is done
is given priority.
jack and