Tuner Mode; Automatic Tv Channel Search - Philips DVDR 80 Owner's Manual

Your DVD-Recorder is equipped with a so called Tuner Mode. With the button
can switch between playback from the disc or the Picture from the internal Tuner (TV
Channels).
If a Cable Box is connected to the
the chapter 'Setting up the GUIDE Plus+
the TV Channels from the Cable Box. The internal Tuner is switched off.
If the Cable Box were disconnected and the setting in the GUIDE Plus+
unchanged (Cable Box: Yes) you are not able to select the TV channels with the
number buttons .
If you do not use the Cable Box anymore, you have to change the setting in the GUIDE Plus+
system settings (Cable Box: No).
During installation, all available TV channels are searched for and saved. If the channel
assignments of your cable or satellite TV provider change or if you are reinstalling the DVD
Recorder, e.g. after moving, you can start this procedure again. This will replace the TV channels
already saved with the new ones.
If data from the GUIDE Plus+
to start this procedure again, repeat the basic settings for the GUIDE Plus+
therefore the Chapter 'Set up the GUIDE Plus+
1
Turn on your TV. Select the channel number for the DVD
Recorder (channel 3 or 4 or the Audio/Video In channel).
2
Turn on the DVD Recorder by pressing
3
Press
will appear at the top of the TV screen.
4
' using D or C .
Select '
5 B continuously to select the line '
Press
on the second screen of menus.) Confirm with C .
6
Select line '
7
Press C . The automatic TV channel search starts. This allows
the DVD Recorder to save all available TV channels. This
procedure may take several minutes.
Installing your DVD Recorder
or
® system' you can switch only between the playback and
® system is available, you can not select this function. If you want
® system'.
on the remote control. The menu bar
' using
jacks and installed as described in
® system remains
Sytem. Read
®
m .
'. (It is
B or A
.
you
®