Philips DVDR 80 Owner's Manual page 44

If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the case,
switch off the automatic function.
If data from the GUIDE PLus+
this information was taken from the GUIDE Plus+
function.
1
Press
will appear.
2
' using D or C .
Select '
3
Select line '
with C .
4
Select line '
with C .
a
b The time/date will automatically be taken from the EPG information.
Therefore you can not set the time/date manually.
5
Select '
6
Confirm with
7
Change the time in line '
your remote control.
8
Check '
To select between the fields, use
Change the information with D , C or the number buttons
.
9
Select one of the following settings in line '
' ': The time set corresponds to the summer time (summer
time is on)
' ': The time set corresponds to the winter time (summer time
is off)
10
When all settings are correct, confirm with
11
To end, press
If the setting has been confirmed with
® system were loaded, you can not change the clock/date because
® system. Therefore you can not select this
on the remote control. The menu bar
B or A
' using
B or A
' using
B or A
' with .
.
' using the number buttons
', ' ', ' ', and ' ' in the same way.
B or A
.
the automatic system is disabled.
and confirm
and confirm
on
.
':
.
Installing your DVD Recorder