Table of Contents
Advertisement
Available languages
Available languages
a
Check whether the cable box is connected and switched on.
1
Check the connection and position of the IR Blaster.
2
If the connection is OK, select:
3
'
Confirm with
4
5
For a new code, select '
Confirm with
6
a
b On your TV set, select the channel number of the cable box and
check the setting on the screen of the TV.
1
Check the settings shown on the screen. If the settings are not
correct, repeat the set-up procedure by selecting '
2
Confirm with
You will now see a screen with useful information of the GUIDE
Plus+
®
system.
3
Confirm with
You will now see a message confirming the completion of the
GUIDE Plus+
®
system set-up process.
4
Confirm with
GUIDE Plus+
®
system. The informations will be available within
the next 24 hours.
' for a new attempt.
on the remote control.
'.
on the remote control.
'. Otherwise, select '
.
.
. This completes the set-up process for the
'.
The GUIDE Plus+
Advertisement
Table of Contents
