Hitachi Compute Blade 500 Series Remote Console Users Manual page 38

The General tab provides the Keyboard pass through mode status. When the
Pass all keystrokes to target. is checked, all key strokes at the system
console are passed to the target server blade. The Keyboard pass through
mode is always enabled.
Mouse tab
Set a mouse mode appropriate for your environment.
Single Cursor
¢
Mouse Acceleration
¢
¢
¢
Note: You need to properly set the mouse mode depending on the OS
running on the server blade as follows:
•
•
2-16
Hitachi Compute Blade 500 Series Remote Console User's Guide
Termination Key:
You can specify a key used to redisplay the mouse cursor of the
system console by terminating the single cursor mode.
Absolute
You can remotely operate the mouse using the mouse cursor
displayed by the system console OS.
Relative
You can remotely operate the mouse using the mouse cursor
displayed by the server blade OS.
Relative (Linux Acceleration)
You can remotely operate the mouse using the mouse cursor
displayed by the server blade OS (for RHEL 5 or earlier, or Linux
except RHEL).
For Windows or Red Hat Enterprise Linux 6, select Absolute.
For Red Hat Enterprise Linux 5 or earlier, or Linux except RHEL, select
Relative (Linux Acceleration).
Using the remote console