Hitachi Compute Blade 500 Series Remote Console Users Manual page 16

Format options: Enable Compression and Create an MS-DOS startup
disk are unchecked.
[USB memory]
File system: FAT32
Allocation unit size: Standard
Supported VGA driver, screen resolution, and number of colors
The remote console supports the following VGA driver, screen resolution, and
number of colors in the server blade.
Table 1-2 Supported VGA driver, screen resolution, and number of colors
OS
Windows
Linux
Note:
1 For details about how to install VGA driver, see Hitachi Compute Blade Series Hitachi
.
Compute Rack Series OS Installation Guide for Windows Server or Server installation
and monitoring tool OS Setup Guide.
Tip: If you use VGA driver, screen resolution, and number of colors other
than the above, the screen may not display properly.
Cause of remote console disconnect
If you operate the followings, the remote console is disconnected:
• Removing the server blade
• Restoring the server blade configuration through the management module
1-8
Hitachi Compute Blade 500 Series Remote Console User's Guide
VGA driver
1 • Display driver of Server
installation and
monitoring tool -
Installation Assistant
• Standard SVGA driver
VESA driver
Remote console overview
Screen resolution
800 x 600
1024 x 768
(Recommended)
1280 x 1024
1600 x 1200
640 x 480
800 x 600
1024 x 768
(Recommended)
Number of
colors
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit
16 bit
32 bit