Restarting BMC
If the remote console cannot be started or the remote console function
cannot be used, execute the recovery procedure of
on page
If the problem is not resolved by executing the recovery procedure described
in Troubleshooting problem, restarting BMC may solve the problem. You can
restart BMC as follows:
•
In the Web console of management module, click Resources tab >
Modules > All modules > Server blade > Server blade x > BMC tab
> BMC restart.
•
In the CLI console of management module, execute the bmc-reset blade
command.
Hitachi Compute Blade 500 Series Remote Console User's Guide
4-2.
Troubleshooting
Troubleshooting problems
4-5