Panasonic CF-U1 series Operating Instructions Manual page 6

Read Me First
As the colours of the wires in the mains lead of this apparatus may not corre-
spond with the coloured markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured GREEN-and-YELLOW must be connected to the
terminal in the plug which is marked by the letter E or by the safety earth symbol
coloured GREEN or GREEN-and-YELLOW.
The wire which is coloured Blue must be connected to the terminal which is
marked with the letter N or coloured BLACK.
The wire which is coloured Brown must be connected to the terminal which is
marked with the letter L or coloured RED.
The mains plug on this equipment must be used to disconnect the mains power.
Please ensure that a socket outlet is available near the equipment and shall be
easily accessible.
n How to replace the fuse
Open the fuse compartment with a screw-
driver and replace the fuse.
Warnings
l This equipment is not designed for connection to an IT power system.
(An IT system is a system having no direct connections between live parts and
Earth; the exposed-conductive-parts of the electrical installation are earthed.
An IT system is not permitted where the computer is directly connected to
public supply systems in the U.K.)
l Disconnect the mains plug from the supply socket when the computer is not in
use.
This equipment is produced to BS800/1983.
6
8-E-1