Reinstalling Software - Panasonic CF-U1 series Operating Instructions Manual

Reinstalling Software

Reinstalling software will return the computer to the default condition. When you
reinstall the software, the flash memory data will be erased.
Back up important data to other media or an external hard disk before reinstallation.
Preparation
l Prepare the following items:
Ÿ The Product Recovery DVD-ROM (included)
Ÿ USB DVD drive (optional) (refer to recent catalogs and other sources
for information about the products available)
l Remove all peripherals (except for the DVD drive).
l Connect the AC adaptor and do not remove it until reinstallation is com-
plete.
<For Numeric keyboard model>
Connecting the USB keyboard to the computer or USB port of the Cradle is nec-
essary.
The following explanations show operations using key combinations of
other keys. When using USB keyboard, press buttons indicated in ( ).
Example: Press
1 Turn off the computer and connect the DVD drive to the
USB port (è page 19).
2 Turn on the computer, and press
(Del) while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
l If the password is requested, enter the Supervisor Password.
3 Write down all of the contents of the Setup Utility and
press +
At the confirmation message, select [Yes] and press
4 Press
At the confirmation message, select [Yes] and press
The computer will restart.
5 Press
screen is displayed.
The Setup Utility starts up.
l If the password is requested, enter the Supervisor Password.
6 Set the Product Recovery DVD-ROM into the DVD drive.
7 Select the [Exit] menu, then select your DVD drive in [Boot
Override].
+ (F2) → Press
(F9).
+ (F10).
+ (F2) or
+
+ (Del) while [Panasonic] boot
and
(F2) or +
(Enter).
(Enter).
37