n Display
<Only for model
with GPS>
The cursor cannot
be controlled prop-
erly.
The cursor can not
be displayed at the
right position.
l Operate the following steps.
A Set [GPS] to [Disabled] in the [Advanced] - [Serial
Port Configuration] of the Setup Utility.
B Press
+
mation message, and press
The computer will restart.
C Log on to Windows as an administrator.
D Click
(Start) and input "c:\util\drivers\gps\GPS.
reg" in [Search programs and files], and press
(Enter).
E Click [Yes], click [Yes] and click [OK].
Then Restart the Computer.
F Press
+
sonic] boot screen is displayed.
G Set [GPS] to [Enabled] in the [Advanced] - [Serial
Port Configuration].
H Press
+
mation message, and press
*9
For Numeric keyboard model, select [Load Default
Value] in [Exit] menu by using
(Enter), or connect a USB keyboard and press
*10
For Numeric keyboard model, connect a USB keyboard
and press
.
l When using application software displaying a unique
cursor (i.e. Paint), note the following restrictions.
The cursor unique for the application software is not
enlarged.
The cursor unique for the application software may
not be displayed at the right position. Confirm the op-
eration position using the Windows cursor (enlarged
cursor when zoomed).
*9
(F10)
and select [Yes] at the confir-
*10
(F2)
or
+
(Del) while [Pana-
*9
(F10)
and select [Yes] at the confir-
(Enter).
(Enter).
and press
.
47