Panasonic CF-U1 series Operating Instructions Manual page 31

NOTE
l PC Information Viewer
This computer periodically records the management information of the flash
memory, etc. The maximum data volume for each record is 2048 bytes. This
information is only used for estimating the cause when the flash memory goes
down by any possibility. They are never sent to outside via network nor used
for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save
function for management information history] in [Hard Disk Status] of PC Infor-
mation Viewer, and click [OK].
(è Reference Manual "Checking the Computer's Usage Status")
A Click [start] - [Control Panel] - [Other Control Panel
Options] - [Touch Panel].
B Select [Calibration] in [Touch Panel Settings].
C Select [9 point], [12 point] or [20 point] in [Accuracy
required], and click [Apply].
D Click [Calibrate Now] in [Calibration].
E Using the stylus, touch each of the "+" target marks
one by one until it blinks, and then press
F Click [Update] in [Calibration].
G Click [OK].
6 Create a new account.
A Click [start] - [Control Panel] - [User Accounts] -
[Create a new account].
CAUTION
l Remember your password. If you forget the password,
you cannot use the Windows operation system.
Creating a password reset disk beforehand is recom-
mended.
(Enter).
31