Adding A Switcher Command; Figure 267: Panel Status - Panel Lock; Figure 268: Panel Status - Panel Lock Or Unlock State; Figure 269: Switcher Command - Select An Input - Kramer K-CONFIG User Manual

9.4.4 The Panel Lock
The Panel Lock lets you select a room controller device and lock its front panel buttons. To lock the front panel, click
the room controller device panel area. The button frame turns blue, see
Figure 267: Panel Status – Panel Lock
Note that an unlock/lock icon appears on the top left side of the panel.
Figure 268: Panel Status – Panel Lock or Unlock State
9.5

Adding a Switcher Command

The Switcher Command lets you select an input to switch to the outputs
Figure 269: Switcher Command – Select an Input
After selecting the input click the Add to List button. The new command is added to the selected trigger action list.
K-CONFIG – Adding Actions to a Trigger
Figure 267.
143