Kramer K-CONFIG User Manual page 11

B: Set up the system in the room.
Note that you can also connect the system at a later stage, when testing the commands.
C: Check, according to the list, that all the device drivers appear in the K-CONFIG Driver Tree (see
example, if you are using a Hitachi Projector, check that its driver is part of the drivers list. If it is not, and you do not
have the driver to a device (for example, a projector), you can either request it from Kramer's tech support or
download the manufacturer's protocol from the Web, and create it yourself via K-CONFIG.
4
Section 5). For
K-CONFIG - Planning the Controlled Room