Figure 338: Virtual Master Device -The Virtual-Master In The Project Navigator; Figure 339: Virtual Master Device - Selecting An Auxiliary Device - Kramer K-CONFIG User Manual

2. Click OK.
The virtual-master appears in the Project Navigator area:
Figure 338: Virtual Master Device –the Virtual-Master in the Project navigator
Click the + sign to add an auxiliary device to the Virtual-Master room controller:
Figure 339: Virtual Master Device – Selecting an Auxiliary Device
You can add three types of devices:
•
Control gateway devices (see
•
Virtual keypad devices (see
•
Virtual keypad device templates (see
180
Section 6.3)
Section 6.4)
Section 6.5)
K-CONFIG - Creating a KRAMER NETWORK Virtual Master