Related Manuals for Kramer VS-3000
Summary of Contents for Kramer VS-3000
-
Page 1: User Manual
KRAMER ELECTRONICS, Ltd. USER MANUAL Master Programmable Remote Control Model: VS-3000 IMPORTANT: Before proceeding, please read paragraph entitled "Unpacking and Contents"... -
Page 2: Table Of Contents
SPECIFICATIONS HOW DO I GET STARTED? UNPACKING AND CONTENTS Optional Accessories KRAMER VS-3000 REMOTE CONTROLLER Getting To Know Your VS-3000 Remote Controller INSTALLATION Rackmounting CONNECTING TO OTHER DEVICES Connecting to a PC Connecting to a video Matrix or other Controlled Devices... - Page 3 ONLY when working with the 1616 and 162 Series switchers. The following sections are amended: 7.4, 7.5, 8.2.1, 8.2.3, 8.2.4, and 8.3. The VS-3000 user manual applies to VS-3000 firmware versions 1.2, 1.3, and 1.4. Sections 7.4, 7.5, 8.2.3 and 8.2.4 Sections 7.4, 7.5, 8.2.3 and 8.2.4 do not apply.
- Page 4 “Audio-Follow-Video (AFV)” and “Breakaway”, when video and audio switchers are combined. When working with just two switchers—VS-1616V and VS-1616A—you can execute this function using the AFV, Video and Audio pushbuttons on the VS-3000. To set the Follow-SYSTEM mode: to access the MENU MODE command screen.
-
Page 5: Introduction
In addition to Kramer high quality remote controllers, such as the one you have just purchased, Kramer also offers a full line of high quality industrial and broadcast distribution amplifiers, switchers, processors, interfaces, controllers and computer-related products. -
Page 6: Specifications
Controller. For information regarding cables and additional accessories, contact your Kramer dealer. VA-50P – to connect the VS-3000 to the mains supply. This is a six-outlet power supply designed to operate Kramer products, which normally uses an external 12VDC power transformer. - Page 7 A 12V power supply is included. The VP-14 is part of the Kramer TOOLS family of compact, high quality, and cost effective solutions for a variety of applications. VP-43 – for remote, long distance, RS-232 operation. The machine is a unique product designed to overcome cable length limitations when transmitting RS-232 information.
-
Page 8: Kramer Vs-3000 Remote Controller
It can control a stand-alone switcher or can be a part of a system, controlling and reflecting the status of all connected devices. The VS-3000 itself may be activated, or an internal pre-set recalled, using dry contact-closure control. It can control up to 128 inputs/outputs combinations. -
Page 9: Installation
This device does not require any specific spacing above or below the unit for ventilation. To rack mount the VS-3000, simply place the front panel rack ears against the rack rails of the rack, and insert standard screws through each of the four corner holes in the rack ears. -
Page 10: Connecting To The An Rs-485 Controlled Machine Or Controller
The VS-3000 should only be turned on after all connections are completed, and all connected devices have been turned on. Do not attempt to connect or disconnect any signals to the VS-3000 while it is turned on. Pressing the toggle switch on the far-left front panel to the up position turns on the VS-3000. - Page 11 - To enter the next item in the MENU – click ENTER again. - To enter SETUP – push and hold ENTER for 3 – 4 sec. - To UPDATE the VS-3000 firmware – push and hold ENTER while turning on the VS-3000.
-
Page 12: Lcd Assignments
SETUP 8.2.3 In order to control any unit via the VS-3000, it is necessary to first install this unit in the VS-3000. To enter the “install” procedure, or to change the setting of the controller itself, you have to run SETUP: Push and hold the ENTER key for about 3 – 4 sec until you see the message: ->... -
Page 13: Setup - List Of Machines
MACHINE list press ENTER to add/remove Press the ENTER key. A list of all the Kramer switchers that can be controlled via the VS-3000 remote controller is displayed. Scroll over the list with the Up/Down keys until the name of the Kramer switcher you want to install appears on the top line of the small LCD window. -
Page 14: Menu Functions
Another feature for this point is the possibility to recall a setup with a number greater than 8. Many Kramer switchers with 8 or less OUT pushbuttons allow the user the ability to store only 8 or less setups from the front panel of the switcher. However, from a PC or a remote control panel it is possible to store and retrieve up to 15 setups in most cases. -
Page 15: Flash Memory Update
“.hex” file. The current version of your VS-3000 software is displayed in the small LCD when turning on the controller. The upper line shows the version number, and the bottom line the date of issue of this version. -
Page 16: Error Messages
UNIT changed STATUS Loaded SETUP from front panel of machine. please, restore display Press ENTER to restore new status of machine KRAMER ELECTRONICS, LTD. - Page 17 ERROR writing in MEMORY This error appears when attempting to UPDATE a program. start from beginning Carefully follow the instructions in the manual describing the updating proceedure. KRAMER ELECTRONICS, LTD.
-
Page 18: Rs-232 Null Modem Connections
Figure 2: RS-232 Null Modem Connection KRAMER ELECTRONICS, LTD. -
Page 19: Taking Care Of Your Machine
AC outlet and from the machine and then remove the cover of the VS-3000 and locate the internal fuse. Confirm that the fuse is good by looking at the wire connected to the ends of the fuse. If the wire is broken, replace the fuse with another of the same value and replace the cover of the machine. -
Page 20: Control Related Problems
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1) Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the web site www.kramerelectronics.com. - Page 21 3) This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place. NOTE: All products returned to Kramer for service must have prior approval. This may be obtained from your dealer. NOTICE...
- Page 22 The list of Kramer distributors appears on our web site: www.kramerelectronics.com From the web site it is also possible to e-mail factory headquarters. We welcome your questions, comments and feedback. KRAMER ELECTRONICS, LTD. 3 Am VeOlamo Street. Jerusalem 95463, Israel Tel: (972-2)-654-4000. Fax: (972-2)-653-5369...
Need help?
Do you have a question about the VS-3000 and is the answer not in the manual?
Questions and answers